RESIDENTIAL SYSTEMS CATALOG ↓
RESIDENTIAL COMPONENTS CATALOG ↓
INSTALLATION KITS & SUPPLIES CATALOG ↓
SYSTEM ACCESSORIES CATALOG ↓
ACCOUNT SERVICES
|

ComfortStar 20,400 / 20,000
Btu/h Ductless Mini-Split System A/C & Heat Pump
Model CHH018CD-13 13.25
SEER R-410A Inverter
Standard
Features
The New R410A Series offers the following features:
|
|
- Active carbon electrostatic fiber filter: Electrostatic
fiber filter traps small dust particles, smoke and pet
fur to prevent allergic reactions. Active carbon filter
eliminates odors such as ammonia.
- Auto Restart & memory Function: A power failure
will not cause any settings to be lost, thus eliminating
the need for re-programming.
- High efficiency: With a high efficiency compressor
and the most optimized heat exchange system, the unit
achieve higher efficiency and contributes to further
energy savings.
- Golden Fin: Coated with anti corrosion golden layer
on the coils to improve hydrophilic performance.
- Swing Function: Allows the louver of the indoor unit
to enhance the air distribution throughout the room.
- 24 Hours Timer: Allows the unit to start and stop
as desired.
- Sleep Function: Adjusts the temperature while sleeping
to make the room more comfortable.
- 3 Speed Control: Will change the fan speed to 3 different
settings to accommodate your needs.
- Warranty - 5 Year Compressor - 1 Year Parts
| Application |
A/C
/ Heat Pump (Cooling & Heating) |
| Nominal
BTU Cooling |
20,400 |
| SEER |
13.25 |
| EER |
9.30 |
| Cooling
Capacity Range (Btu/H) |
20,400 |
| Nominal
Heating Capacity (Btu/H) |
20,000 |
| HSPF |
7.7 |
| Heating
Capacity Range (Btu/H) |
20,000 |
|
Heating @ 17 Degrees (Btu/H) |
13,100
(66%) |
| Refrigerant
Type |
R410A |
| Moisture
Removal |
2.54
Pints Per Hour |
| Power
Voltage (Volts/Phase/Hz.) |
208/230-1-60 |
| Breaker
Size |
20
Amps |
| RLA
Cooling/Heating (Amps) |
6.14/8.18
Amps |
| Controls |
Electronic
Wireless Remote |
 |
| Indoor
Unit: |
CHH018CD-13(I) |
| Mounting
Location: |
Wall-Mounted
(Surface) |
| Airflow-High
Speed (CFM) |
900 |
| Fan
Speeds |
High
- Medium - Low |
| Noise
Level Low/Med//High (Db) |
44/47/50 |
| Width
(Inches) |
40.15" |
| Height
(Inches) |
12.20" |
| Total
Depth (Inches) |
8.94" |
| Indoor
Unit Weight (lbs) |
28.7 |
 |
| Outdoor
Unit: |
CHH018CD-13(O) |
| Outdoor
Noise Level (Db) |
57 |
| Width
(Inches) |
37.40" |
| Height
(Inches) |
26.93" |
| Total
Depth (Inches) |
13.39" |
| Outdoor
Unit Weight (lbs) |
130 |
 |
| Pipe
Size (Liquid) |
5/8" |
| Pipe
Size (Gas) |
3/8" |
| Max
Pipe Length / Differential |
82
ft. / 39 ft. |
| Factory
Charged with R410A For |
26 ft. (61.73oz. R410A) |
| Additional
R410A Charge Over This @ |
0.27oz./ft. |
| Indoor
Connection Method: |
FLARE |
| Outdoor
Connection Method: |
FLARE |
Limited Warranty: 1 Year Parts and 5 Years Compressor.
Specifications are subject to change without notice. |
Press the Buy Now button on the top or bottom of this page
to see a full list of accessories that are available.
If this is a new installation we recommend the full install
kit that will supply most of the required materials other
than your electrical wire.
|
|
 |
|
ComfortStar
Product Reference Guides |
|
|
|
ComfortStar
Brochure |
ComfortStar
Install Manual |
ComfortStar USA is a nationally, as well as internationally, recognized
of high quality and high efficient air conditioning & heating products.
They offer Outdoor Condensing units & heat pumps, as well as Mini
Split systems as air conditioning units alone and with heat pumps. Other
products include; PTAC units, portable air conditioning units, air curtains,
and dehumidifiers.

Standard active carbon electrostatic fiber filter
in all our mini-splits
All for your well being…
New environmentally friendly R410A refrigerant in all heat pump
units

More than a 30% increase in energy efficiency in comparison
to the 10 SEER unit, therefore reducing your utility bill
and increasing savings.
SEER value of 16.0 in heat pump units, this represents
up to a 23% above the 2006 “13 SEER” efficiency
mandate.
Environmentally friendly, reducing fossil fuel consumption
and limiting air pollution. Heat pump units use environmentally
friendly R410A refrigerant designed to prevent the depletion
of the ozone layer.
High efficiency compressor and coil, increases the unit
size by only 3 inches from the 10 SEER units. Heat pump
units use Inverter Technology to achieve even higher efficiency
in the smaller sizes.
Ductless systems provide less than 5% cooling loss which
occurs in insulated refrigerant lines versus typical 40%
loss through ducted systems.
Single zone comfort for residential and light commercial
applications: schools, nursing homes, apartments, computer
and telephone rooms.
Great for renovating or remodeling older homes.
Quieter than a window unit, mini-splits are comprised
of an indoor and an outdoor unit, which keeps noisy compressors
and motors outdoors.
Unlike window units, views will not be obstructed.
Burglar free. Intruders cannot climb in through openings.
The indoor unit is connected to the outdoor unit through
a small 3 inch opening on the wall.
Looks beautiful on the wall with the comfort of a remote
control.
Same power source from indoor unit to outdoor unit.
|

1.) Mount indoor and outdoor units
2.) Connect the refrigerant lines.
3.) Make a few electrical connections. |

A Heat Pump System can provide both cooling and heating
to your home within one
system. During the heating season, heat pump moves heat
from the cool outdoor into
your warm house; during the cooling season, heat pump moves
heat from your cool
house into the warm outdoors. Heat pumps offer an energy-efficient
alternative to a
furnace, because they move heat rather than generate heat.
Our ComfortStar Plus Series
Heat Pumps can provide up to 3.1 times the amount of heat
compared to a same size
electric heater.
Because our Heat Pump units use the latest INVERTER compressors
all our units exceed
industry standards. |

At the heart of ComfortStar Plus Series Heat Pump system
is the innovative inverter
technology. The Inverter Controlled Compressor operates
by changing the frequency from
60Hz to a varying range (20Hz to 125 Hz). The inverter will
control the compressor to
modulate on a high frequency and rapidly reach desired temperature.
When the desired
temperature has been achieved, the inverter will control
the compressor to run on a lower
frequency to maintain precise temperature and consume less
energy. |

Inverter Controlled Compressor maintains precise control
of room temperature and
creates a more comfortable environment. In conventional
ON/OFF compressors, the
compressor turns OFF once the set temperature is reached,
and turns back ON after
the temperature rises. |
The time it takes for the unit
to switch on and off causes
the room temperature
to greatly fluctuate. With
the Inverter Controlled
Compressor, the power
reduces once the desired
temperature has been
reached, but continues
operating at a reduced state
to maintain a stable room
temperature with minimal
fluctuation.
|
|

 |
With low-frequency operation,
the system reduces the energy
waste and provides the best
efficiency. |






Full
Install Kit and Accessories Available
Press the Buy One Now Button to Review.
Back To Top
|
|